Browse all practice questions for the HESI Radiologic Technologist Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

HESI Radiologic Technologist Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which imaging metric describes the ratio of signal to noise in the resulting image?
  • mAs is the product of mA and exposure time.
  • Technologists working in fluoroscopy should use shielding whenever possible in addition to the apron and curtain.
  • Which factor does not contribute to the calculation of effective dose?
  • Which organization certifies radiologic technologists?
  • If a digital system has a spatial resolution of 3 lp/mm, it can resolve an object as small as _____ mm.
  • Which unit is used to express occupational dose limits for hands?
  • As kVp increases, the probability of photoelectric absorption generally
  • Which statement about shielding in fluoroscopy is correct?
  • Ionizing radiation is capable of removing _____ from atoms as it passes through matter.
  • Which of the following is NOT a type of technique chart?
  • In the wrist radiograph example, the focal spot size was
  • An order for an x-ray exam must include, at minimum, all of the following except: patient's date of birth.
  • Digital radiography images should be repeated if there is a problem with _____ .
  • For lossy compression, the ratio is typically expressed as which option?
  • Distortion depends on which of the following? I. object thickness II. object position III. object shape IV. object material?
  • Which artifact is caused by incomplete erasure?
  • The acronym PBL stands for which device?
  • How many pixels does a 3 megapixel monitor have?
  • An exposure index of +3 on a digital radiography system indicates which of the following?
  • Because of the line focus principle, the effective focal spot size decreases with decreasing _____.
  • This radiology pioneer wrote about the importance of filtration and collimation.
  • The rate of rise and fall of a sine wave is called its _____.
  • The two primary forms of x-ray interaction in the diagnostic range are ____.
  • All of the following are types of technique charts except:
  • Which term refers to a system that stores and provides access to radiographic images?
  • Scatter radiation increases as _____ increases.
  • A feature size of 0.1 mm requires a spatial resolution of at least
  • The negative side of the x-ray tube holds the _____.
  • Which of the following has the lowest energy among the listed electromagnetic waves?
  • Linearity testing in radiography assesses the relationship between which of the following?
  • On what date was the x-ray discovered?
  • Who discovered the x-ray?
  • If the source-to-image distance doubles, by what factor must the mAs increase to maintain exposure?
  • Gas typically has a Hounsfield unit value of _______.
  • DR scintillators are often made of which material?
  • ___________ should be done on an annual basis by a medical physicist.
  • The three classifications specific to digital imaging artifacts are _____.
  • Total brightness gain is the product of which two gains?
  • The three primary geometric factors affecting image quality are _____.
  • Viewing the fluoroscopic image in magnification mode increases which aspect?
  • Which of the following is not a geometric factor affecting image quality?
  • Because of the line focus principal, the effective focal spot size decreases with decreasing _____ .
  • The chemical element is determined by the number of _____ in the atom.
  • Hounsfield units are used to describe radiodensity in which imaging modality?
  • ALARA stands for which of the following phrases?
  • In the wrist radiograph example, the SID was
  • Which statement about energy distribution in the x-ray tube during exposure is correct?
  • MTF stands for Modulation Transfer Function.
  • Which concept describes the combined effect of Compton interactions, photoelectric absorption, and transmitted x-rays on image formation?
  • As an x-ray tube ages, the inside can become coated with tungsten, which can cause _____ in the tube.
  • X-rays transmitted without interaction contribute to which of the following?
  • Which statement best describes the effective dose in radiology?
  • The best way for technologists to reduce occupational exposure is to follow the principles of I ALARA II time and distance III shielding.
  • Characteristic x-rays are produced by _____.
  • Bremsstrahlung radiation is produced when high-energy electrons are decelerated by the atomic nucleus.
  • Fluoroscopy images can be described as which of the following?
  • What is the milliampere-seconds value with exposure factors of 27ms, 200 mA and 70 kVp?
  • A graph of the frequency of occurrence versus digital value intervals is called a(n) _____.
  • The exposure switch on a portable radiography machine should be no shorter than...
  • How often should the exposure timer be measured for accuracy in radiography equipment?
  • Bremsstrahlung x-rays are produced by _____ at the target.
  • Which statement best describes the ion formed when an atom loses electrons?
  • Barium has an atomic number of 56. How many protons does it have?
  • This modality is fast and extremely sensitive to various tissue density making it the most versatile imaging modality used for all kinds of pathology.
  • A moving object has which energy?
  • The use of which technique improves contrast and reduces patient dose?
  • As spatial frequency increases the object size _____ and the spatial resolution _____.
  • What is the thickness of lead for the lead curtain hanging from the fluoro carriage?
  • An incident x-ray interacts with an atom without ionization during _____.
  • OID affects all of the following except.
  • In digital imaging, spatial resolution is ultimately limited by which parameter?
  • Which is not one of the clinical performance standards found within radiography?
  • The number of gray shades that an imaging system can reproduce is called its which?
  • Patient thickness affects image quality by influencing which of the following?
  • The heel effect in radiography is primarily caused by which of the following?
  • If the SID changes from 40 inches to 60 inches, by what factor must mAs change to maintain exposure?
  • The quantity of bremsstrahlung radiation increases proportionately with increased _____ .
  • Which statement about the air gap technique is true?
  • Each sweep of the source-detector around the body during CT is called a _____.
  • This equipment test looks at consistant x-ray beam intensity from one exposure to the next using a particular technique.
  • A detector's detective quantum efficiency (DQE) describes its ability to do what?
  • Dose Area Product is a measure used to quantify patient dose by combining dose with what parameter?
  • Radio waves, light, and x-rays are all examples of _____ energy.
  • If the dose at 6 feet is 5 Gy, what is the intensity at 3 feet?
  • Decreasing the kVp will increase patient dose.
  • Total brightness gain in image intensifier imaging is the product of which two gains?
  • Differential absorption is dependent on (the) which of the following?
  • The filament is made of _____.
  • The software correction that equalizes the response of each pixel to a uniform exposure is called which?
  • What controls the exposure factors during a fluoroscopic exam?
  • A moving object has which type of energy?
  • A primary benefit of having a wider dynamic range in digital radiography is which of the following?
  • A cumulative timer is designed to _____ of fluoroscopy beam-on time.
  • What is the name of the publication that documents dose limits for both radiation workers and members of the public?
  • The most commonly used beam restricting device is the _____.
  • What is the effect on Compton scatter when the mass density of the absorber increases?
  • Spatial resolution improves with a decrease in motion blur and a decrease in geometric blur. Which option correctly completes this statement?
  • Which scintillator material is used in digital radiography detectors?
  • The bit depth of a digital image primarily determines which aspect of image quality?
  • What type of grid error is characterized by decreased density on both sides of the image?
  • If I double the mA while keeping time the same, what happens to exposure?
  • The _____ is the source of radiation in the x-ray tube.
  • Which device's design, incorporating a heated filament to emit electrons, influenced modern x-ray tube construction?
  • Detective Quantum Efficiency (DQE) is a measure of which property of an image receptor?
  • The milliampere-seconds (mAs) is calculated by multiplying which two quantities?
  • Where is the focal spot located within the x-ray tube?
  • Primary radiation is _____.
  • What is the primary function of a Picture Archive and Communication System (PACS) in radiology?
  • The three main parts of the x-ray imaging system are the x-ray tube, _____, and _____.
  • A grid ratio is determined by
  • Most of the heat generated at the target is due to _____.
  • Absorbed dose takes into consideration which of the following?
  • Attenuation in radiography is caused by which processes?
  • The high voltage generator in an x-ray imaging system is responsible for generating the Kilovoltage Across The Tube.
  • Which combination correctly lists all three main parts of the x-ray imaging system?
  • TG 18-QC is a standard test pattern used to evaluate which aspect of imaging systems?
  • Which represents the relationship between SID and recorded detail?
  • DR scintillators can be made from which materials?
  • Whose hand is in the famous first X-ray image?
  • When electrons bombard the target, _____% of their kinetic energy is converted to heat.
  • What is the lead equivalence commonly used for protective aprons in fluoroscopy?
  • Increasing the source-to-image distance (SID) has which effect on magnification?
  • Dynamic fluoroscopy refers to images that __________.
  • Most x-rays produced at the target are _____.
  • Atoms and molecules are the fundamental building blocks of _____.
  • An atom in a normal state has an electrical charge of _____.
  • Which type of artifact results from poor patient preparation?
  • Which C-Arm mode will give the patient the most dose?
  • Starting and maintaining intravenous access as prescribed by a licensed independent practitioner is within a radiographer's scope of practice.
  • Which parameter primarily controls the quantity of photons produced during exposure?
  • Valence describes the number of electrons in which shell?
  • Which retinal cells are responsible for color vision under bright light?
  • The visible light field must be within what percentage of the actual x-ray field?
  • The smallest quantity of any type of electromagnetic radiation is a(n) _____.
  • If I want to use a total of 3.2 mAs and I'm using 200 mA, how many seconds should my time be?
  • An abdomen decubitus is performed with 80 kVp and 32 mAs at a distance of 40 inches. The resulting exposure is 0.24 mGya. If the same technique is used at 80 inches, what will the exposure be?
  • The atomic number of Lead is 82 and the atomic mass number is 207. How many neutrons does it have?
  • What are the two principal characteristics of a digital medical image?
  • _____ is defined as the ability to image two separate objects and visually detect one from the other.
  • Which sensor technology is commonly used in digital fluoroscopy to achieve high spatial resolution?
  • A graph of the frequency of occurrence versus digital value intervals is called a(n) _____?
  • The air gap technique is achieved by placing the patient 10-15 cm away from the image receptor to reduce scatter radiation at the IR. Which technique reduces scatter radiation reaching the image receptor by increasing the distance between the patient and the image receptor by 10-15 cm?
  • Which term describes adjusting image brightness and contrast to optimize visibility of structures?
  • What computer language is used between the HIS and RIS?
  • The scattered x-ray from a Compton interaction usually retains _____ of the energy of the incident photon.
  • When is it not recommended that a pregnant patient receive a radiographic procedure of the abdomen?
  • If an image receptor has a high probability of interacting with the x-ray beam, then it has a high _____.
  • This imaging modality is able to penetrate bone without affecting the image. It also takes high resolution images of soft tissue.
  • Object artifacts in digital imaging can be caused by errors in histogram selection.
  • Approximately _____% of the x-ray beam incident on the patient is transmitted through the patient without interaction to become part of the image-forming beam.
  • Photon energy increases with increasing what?
  • The standard tool used to measure the effect of focal spot size is the _____.
  • Which factor affects x-ray beam quality?
  • The 3 color filters used on a color active matrix LCD are
  • Which approach best minimizes occupational exposure?
  • Compton scatter contributes to _____.
  • The measurement of the amount of exposure on the digital image receptor describes
  • Which imaging modality uses a superconducting magnet and radiofrequency to visualize soft tissues without ionizing radiation?
  • In digital imaging, spatial resolution is ultimately limited by which factor?
  • At 55 kVp, _____ of the x-rays produced are bremsstrahlung.
  • Which if the following refers to the ability of the imaging system to preserve signal contrast as a function of spatial resolution?
  • In a neutral atom, the number of protons equals the number of which particle?
  • Which term refers to the standard that enables storage and transfer of medical images and related data?
  • Bremsstrahlung x-rays are produced when the incident electron, under the electromagnetic influence of the atom's nucleus, ________.
  • Which of the following will not affect your exposure indicator value?
  • Using an air gap technique to improve contrast has the same effect as using a grid with which ratio?
  • The quantity of bremsstrahlung radiation increases proportionally with increased what?
  • Which statement correctly identifies the material used for the X-ray tube filament?
  • Which statement best describes the function of a collimator in radiography?
  • A higher fill factor indicates that a greater portion of the pixel face is sensitive to x-rays, which most directly increases:
  • X-rays have a weighting factor (Wr) of what?
  • In digital radiography, the histogram shows the distribution of pixel values; what does the x-axis represent?
  • Which material is mentioned as the target for producing characteristic radiation when bombarded by incident electrons?
  • Which of the following is not a property of a photon?
  • Air gap technique is equivalent to using a grid with which ratio?
  • In a dual focus tube, there are two what?
  • The negative side of the x-ray tube holds the _____.
  • The lowest energy range of the electromagnetic spectrum is _____.
  • What does effective dose take into consideration?
  • Which statement best describes the effect of increasing patient thickness on image contrast?
  • Which two factors are needed to use the Inverse Square Law?
  • Grid use improves contrast by reducing scatter; this typically requires higher exposure.
  • X-ray photons that pass through the patient without interacting contribute to which aspect of radiographic imaging?
  • Flat-field correction in digital imaging is used to compensate for which issue?
  • Increasing which setting increases the rate at which photons are produced in the x-ray tube?
  • Thermionic emission at the filament creates a _____.
  • Which type of radiation is the dominant output from the X-ray tube in diagnostic imaging?
  • Which energy interaction occurs only at very high energies used in therapy and PET imaging?
  • Which instrument is used to measure focal spot size in an x-ray tube?
  • A ghost image can occur in digital imaging because of _____.
  • Which color channel is NOT part of the RGB color model used by color displays?
  • What term denotes the number of electrons in the outermost shell?
  • In which interaction is there complete absorption of the incident x-ray photon?
  • If an atom has the same number of protons and electrons, its overall electrical charge is zero.
  • Gamma rays are produced in which part of the atom?
  • The three primary geometric factors affecting image quality are described as which group?
  • This modality determines a person's risk for future fractures.
  • Which statement about fluoroscopy magnification mode is correct?
  • The innermost electron shell is symbolized by the letter _____.
  • Distortion depends on: I. object thickness II. object position III. object shape IV. object material
  • Which identifier is commonly used to locate a patient’s medical history across visits?
  • Which of the following is not one of the three primary geometric factors affecting image quality?
  • What is the removal of an electron from an atom called?
  • Which statement about ARRT ethics is true?
  • Radiation protection basics are:
  • The time from the end of CT image scanning to image appearance on the monitor is called the _____ time.
  • Lossless data compression in radiology is used to achieve what?
  • Which component controls the path of electron flow from the photocathode to the output phosphor to maintain image clarity?
  • A DR system that directly converts an X-ray signal into an electronic signal is called:
  • During an exposure, most of the _____ energy of the projectile electrons is converted to _____.
  • The portion of useful image-forming x-rays is referred to as the ______.
  • What is the formula for magnification factor?
  • Lossless compression reduces data files by up to which ratio?
  • Which geometric factor is most directly related to spatial resolution due to the focal spot size?
  • The device used to measure the luminance response of monitors is called a
  • A 15% increase in kVp is equivalent to which change in mAs?
  • What is the removal of an electron from an atom called?
  • The three primary factors influencing the intensity of scatter in the image-forming beam are ____.
  • The percentage of the pixel face that is sensitive to x-rays is called the
  • Which organization recommended limiting the amount of x-ray exposure to radiation workers and the general public?
  • Which interaction occurs only at the very high energies used in radiation therapy and in nuclear medicine P.E.T. imaging?
  • The effective focal spot size is smaller than the actual focal spot size under which condition?
  • Increasing object-to-image distance (OID) primarily increases what aspect of the radiographic image?
  • For exposures that are less than 10 ms, the timer should be accurate within what percentage of each exposure?
  • Misalignment between the light field in the x-ray beam must not exceed ____ of the SID.
  • General-purpose radiographic units must have a minimum total filtration of ____ mm aluminum.
  • If the target angle is increased, the effective focal spot size will
  • Which statement describes what happens when characteristic radiation is produced by an incident electron at a tungsten target?
  • Which organization sets radiation dose limits for both workers and the public?
  • Photons with the highest frequencies have the _____.
  • Which term describes the interval between finishing CT data collection and the images being displayed?
  • In the image intensifier, which component emits electrons when stimulated by light photons?
  • If HIS, RIS, and PACS are down, as long as a working modality is available, imaging can still be provided.
  • DR scintillators can be made of III. CsI IV. GdOS.
  • How many shades of gray can the human visual system distinguish?
  • A charge-coupled device used in digital fluoroscopy provides high which property?
  • Photon energy and the probability of photoelectric interaction depend primarily on which factor?
  • Which parameter among the following best controls the energy spectrum of the X-ray beam?
  • Lossy compression can be used for which type of data?
  • An outer-shell electron is ejected out and the atom is ionized during _____.
  • Which tissue has the greatest mass density?
  • If a portable chest radiograph uses 110 kVp with 2.0 mAs and an 8:1 grid, what is the mAs required to maintain receptor exposure?
  • The positive beam limiting device (PBL) assures that the x-ray beam is collimated to which of the following?
  • Out of the people listed below, who is the best person to assist with holding a child during an x-ray exam?
  • The bit capacity of each pixel identifies the _____ of a digital imaging system.
  • What is the primary purpose of beam restricting devices in radiography?
  • Which term describes the whole-body dose used to estimate radiation risk?
  • In the retina, which cells are stimulated by low light, and which by bright light?
  • The effective focal spot size is _____ the actual focal spot size.
  • Which statement correctly describes the Dose Area Product?
  • The unobservable image stored in the PSP of the image plate is called the
  • What is the minimum source-to-skin distance for a fixed fluoroscopy unit?
  • Which option best describes positive beam limitation?
  • Radiographic image quality is improved when the _____ is increased.
  • OID primarily affects which aspect of image quality?
  • Which body part has the highest subject contrast?
  • Where is x-ray production primarily located in the tube?
  • Bremsstrahlung x-rays are produced by what process?
  • Which of the following will result in an increase in patient dose during fluoroscopy?
  • How many ethical standards are in the ARRT code of ethics?
  • This hot cathode ray tube design led the way to how x-ray tubes are made today.
  • The device that converts scintillator light into a digital signal is called which?
  • DQE is _____.
  • The organization that created the registry exam that must be passed in order to practice radiography is:
  • What is the exposure limit for members of the public receiving a single exposure?
  • The _____ of electromagnetic radiation is constant.
  • In an x-ray tube, most of the kinetic energy of the incoming electrons is converted to heat.
  • What does DQE measure?
  • What does PACS stand for?
  • If your modality cannot download a patient worklist, what's the best way to continue on with performing exams and patient care?
  • Which device reduces patient dose by converting x-ray photons to visible light to brighten images?
  • Which factor directly affects the maximum detectable contrast in a digital radiography system?
  • Which radiology pioneer emphasized filtration and collimation as safety measures?
  • The best way to minimize magnification is to use a _____.
  • Which material is used for filtration in radiography?
  • Using an image receptor with high DQE can result in lower patient dose.
  • What is the dose limit for a radiologic technologist's hands?
  • How is magnification calculated?
  • Lossy compression reduces data files _____.
  • Equivalent dose considers which factors?
  • Which imaging modality captures dynamic images?
  • The abbreviation lp/mm stands for
  • TG 18-QC is a standard test pattern used to evaluate which aspect of imaging systems?
  • What is the mAs if I use 200 mA with a time of 140 ms?
  • Which modality is based on the patient emitting radiation due to administered radioactive tracers?
  • What term describes the percentage of the pixel face that is sensitive to x-rays?
  • Filtration primarily addresses which type of x-ray photons?
  • Which of the following is not a function of the anode in an x-ray tube?
  • Increasing kVp has which effect on x-ray beam?
  • DICOM is a standard for
  • Radiology equipment should be inspected by a qualified medical physicist every what period?
  • Characteristic x-rays are produced by _____.
  • Which kVp selection would result in the most scattered x-rays in the image-forming beam?
  • With regards to radiation dose, the lens of the eye should never receive more than _____ per year for a person working with radiation.
  • What is the velocity of all electromagnetic radiation?
  • Why is the intensity of the beam greater on the cathode side than the anode side?
  • The energy released when an inner-shell vacancy is filled is called the _____.
  • Spatial frequency describes the quality of spatial resolution in terms of what?
  • Artifacts are an acceptable part of digital imaging.
  • Each pixel of information in a CT image contains numerical information based in which units?
  • Which imaging modality is described as fast and extremely sensitive to tissue density differences and is widely used for pathology?
  • Digital radiography offers wide exposure latitude, meaning which statement is true?
  • How can you improve image contrast with a heavy patient without increasing patient dose?
  • The purpose of the lead apron in fluoroscopy is to protect the technologist from radiation caused by which interaction?
  • Projectile electrons travel from which part of the x-ray tube to which part?
  • Gamma rays are produced in the _____ of the atom.
  • Lowering kVp affects patient dose and image contrast in which way?
  • Most of the x-rays produced at the target are which type?
  • Which parameter is not one of the three primary scatter-influencing factors?
  • What does RIS stand for?
  • Increasing mAs will increase patient dose.
  • What mostly affects the penetrability of the x-ray beam?
  • Characteristic x-rays are produced when an electron transitions to fill inner-shell vacancies.
  • Increasing kilovoltage peak (kVp) generally results in which effect on scatter radiation?
  • True or False: The ARRT is only concerned about ethics violations related to patient care.
  • Which human tissue is the most radiosensitive?
  • What is the number assigned to each individual radiology exam called?
  • Compute grid ratio: a grid with height 8 mm and interspace 0.8 mm
  • An abdomen decubitus radiograph is performed with 75 kVp at 80 mAs with a source-to-image distance of 80 inches. If the SID is moved to 40 inches while maintaining the same exposure, what should the new mAs be?
  • The filament is located on which side of the x-ray tube?
  • The smallest discrete unit of electromagnetic radiation is a(n) _____.
  • The four properties of photons are _____, _____, _____ and _____.
  • Which identifier is used to uniquely identify a patient across encounters and generally remains constant?
  • Subject contrast is affected by
  • A dual focus tube has two _____.
  • At energies below 40 keV, the predominant x-ray interaction in soft tissue and bone is _____.
  • The portion of useful image-forming x-rays is referred to as the _____.
  • Compton scatter is directed at _____ angle from the incident beam.
  • Artifacts seen after an exposure due to poor patient preparation or poor instruction are called
  • With digital imaging, patient dose can be reduced by using higher _____ techniques.
  • Filtration is used to _____.
  • Distortion can be reduced by
  • Who introduced ALARA in 1950?
  • Characteristic K-shell x-rays have an effective energy of _____ keV.
  • In CT imaging, which material is typically associated with a Hounsfield unit near -1000?
  • The number of light photons emitted within the image intensifier is ______ to the amount of x-ray photons exiting the patient.
  • Which group enforces the accreditation of a Radiologic Technology program?
  • This device discovered by Michael Pupin released a large number of light photons with just a few x-ray photons, thus reducing the dose of x-rays to the patient.
  • Exposure linearity must be within which percentage for adjacent milliampere stations?
  • Which factor most directly contributes to geometric unsharpness in radiography?
  • When atoms of various elements combine, they form _____.
  • With narrow detectors and fast helical scanning, this modality is able to produce excellent images of a patient's lung tissue.
  • Which energy unit is used to express the energy of characteristic radiation?
  • A lead apron using 0.50 mm Pb provides approximately how many HVLs at 100 kVp?
  • Which QA term describes the ability of an imaging system to produce the same output for repeated exposures at the same technical factors?
  • Dose Area Product takes into account exposure and the size of the lightfield. Which option best reflects this concept?
  • An image of the wrist is made using 400 mA, 25 ms, 70 kV, a focal spot of 0.4 mm, minimum OID, in a 30 inch SID. Which of the following changes will result in the largest increase in magnification?
  • As mAs is increased the signal to noise ratio is _____.
  • Compton scatter directions can be directed at which angle from the incident beam?
  • Subject contrast is affected by _____.
  • The cathode side of the tube should be directed toward which part of the patient?
  • Which term best describes the system that handles patient demographics, orders, and scheduling in a radiology department?
  • The three primary geometric factors affecting image quality are which of the following?
  • In fluoroscopy, the input phosphor converts X-rays to light.
  • Which organization certifies radiologic technologists in the United States through registry exams?
  • An atom that loses or gains one or more electrons is a(n) _____.
  • The energy of a photon is directly proportional to its _____.
  • X-rays transmitted through the patient without interaction contribute to which component of radiographic image formation?
  • When the structure of a body part prevents use of a short object-to-image distance (OID), which adjustment reduces magnification distortion?
  • Image detail is also called _____.
  • Which of the following is the annual dose limit to the lens of the eye for radiation workers?
  • When electrons bombard the target, _____% of their kinetic energy is converted to heat.
  • Contrast resolution is improved by which of the following?
  • Which combination reduces geometric unsharpness most effectively?
  • In image intensifier fluoroscopy, brightness increase results from which combination?
  • Which statement is NOT part of radiation protection basics?
  • The contrast on the radiograph that is affected by the patient's size, shape, and tissue composition is called
  • Focal spot blur can be reduced by using which of the following?
  • Which parameter primarily controls the energy of the X-ray photons?
  • When x-rays are transmitted through the patient and reach the image receptor, these photons contribute to which part of the radiographic signal?
  • The exposure switch for portable x-ray units must allow the technologist to be at least how far away from the x-ray source?
  • Who died from overexposure to x-rays?
  • What is the common lead shielding thickness used for fluoroscopy safety?
  • Which imaging modality uses X-ray technology to provide real-time moving images during procedures?
  • What does equivalent dose take into consideration?
  • _____ is defined as the ability to image two separate objects and visually detect one from the other.
  • What does NCRP stand for?
  • A moving object has _____ energy.
  • Total brightness gain of image intensifiers results from which of the following?
  • Using a higher grid ratio improves contrast by reducing scatter but requires an increase in exposure.
  • Which statement about increasing the field of view in fluoroscopy is true?
  • Anyone in the following professions can order an x-ray except..
  • Which statement best describes the relationship between protons and electrons in a neutral atom?
  • Measuring the relationship between the output intensities of adjacent mA stations is a test of _____.
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy